500ml Aluminum Can Mockup
6 slides
About the product
Printers put ink straight onto the aluminum, with no label in between, and use a white base only where the color needs to print cleanly. Where that base is missing, the metal comes through the ink. This can mockup follows the same principle: paint the parts you want solid, and the aluminum shows everywhere else.
Details:
- high-quality PSD file, 5400 x 3600 px at 300 dpi;
- two Smart Objects, one for paint on the body and one for a paper label;
- three can finishes: brushed, satin, and polished;
- three ground shadows, switchable or off, over an editable background color;
- artwork areas of 1142 x 1865 px for the paint and 1142 x 1670 px for the label.
Paint the body, or leave the metal bare
The design Smart Object is a flat sheet 1142 x 1865 px at 300 dpi, and Photoshop wraps it around the body with a quilt warp. This allows straight lines to curve with the can instead of sliding across it. Transparency is the whole trick. Fill the sheet edge to edge for a fully printed can; knock holes in it and the bare aluminum reads through those holes as part of the design. Above the artwork are two more layers, Lights on Screen and Shadows on Multiply, which means the highlight down the belly of the can and the shading on both sides land on top of whatever you put in.
Three finishes under the artwork
The Can Options group holds three full renders of the same can. Brushed has a visible vertical grain and a warm cast. Satin is the lightest of the three, with a soft gradient and almost no hot spots. Polished is closer to a mirror than to a brushed sheet, with dark flanks and one narrow band of white down the middle.
The label is a second object
The paper label works separately from the paint, as its own Smart Object (1142 x 1670 px), with its own Lights and Shadows on top. You can run both together for a printed can with a paper band over it, or hide one group and use the other alone. Below the can, the Shadow Options group has three ground shadows: a short contact pool, a long cast to the right, and a tight one with almost no spread. If you turn all three off, the can floats on a flat background.
An absolute exclusive for the Pixelbuddha community. 500ml Aluminum Can Mockup is available legally only through Pixelbuddha. No other website, marketplace, or distributor is authorized to offer it.
Usage:
Craft beer and seltzer launches, energy drink concepts, beverage branding boards, packaging portfolios, label design presentations, pitch decks for drink startups, supermarket shelf visuals, crowdfunding pages, agency case studies, and trade show graphics.
FAQ
One PSD file at 5400 x 3600 px and 300 dpi. The two Smart Objects, the three can finishes, the three shadows, and the background are all in place and all editable.
Open the EDIT group and double-click EDIT DESIGN. It opens as a separate document at 1142 x 1865 px, with an empty layer waiting for your file. Save and close, and the can rebuilds itself with the artwork wrapped around the body.
Anything transparent in the design Smart Object lets the metal underneath show. Leave the background of your sheet empty; only the shapes you drew get printed, which is how a can with bare aluminum panels is made in production.
The two groups are separate: run the label over a painted body, use either one on its own, or hide both and present the plain can.
The Background layer takes any color you set. Each of the three shadows has its own visibility, and with all of them off, the can is left clean for cutting out or dropping into a scene.
Adobe Photoshop, with a version that supports Smart Objects. The file was built with warped Smart Objects, and the artwork goes in through EDIT DESIGN and EDIT PAPER LABEL, not onto the can by hand.
This resource is created for Adobe Photoshop and works best with the latest Creative Cloud version for full Smart Object support.